How Often to Change Roomba Filter? Maintenance Made Easy

People usually expect their Roombas to work like magic. It’ll clean while you eat, nap, or binge-watch your new favorite on Netflix. So far, so good. But after a couple of weeks, your Roomba doesn’t seem to suction all debris from your floors. Turns out, your Roomba filter isn’t meant to last forever. So, how often to change Roomba filter?

When Should You Change Your Roomba Filter?

how often to change roomba filter

The filter may be the most important part of any vacuum, and Roomba’s are no different. They trap the dust, fine dirt, and allergens floating around on your floors. Once a filter gets clogged, it will no longer clean properly, rendering the Roomba ineffective.

But how often to replace Roomba filter? The answer really depends on the conditions of your house. If you have pets, you will have to replace the filter more often. The same applies to homes where you need to use your Roomba every day, or very large homes.

In most cases, a Roomba filter change will be in order every 6-12 months. If you have pets or live in a very dusty environment, replacing the filter every 3 months is a better idea. In some cases of very frequent use, you may even have to replace it every 2 months!

However, these are no hard-and-fast rules. If you feel like your Roomba filter isn’t doing its job, it may be time for a change. So, when to replace Roomba filter depends more on your cleaning needs and should be gauged by your Roomba’s performance.

Roomba filters are pretty easy to find. You can easily get something like the Roomba i3 filter replacement online.

Even older models have filter replacements that are available everywhere. A Roomba 675 filter tends to come in a pack, so a one-time purchase will keep you covered for a long time. Other iRobot Roomba 675 replacement parts can also be found online.

In the same vein, people often ask: how often to replace Roomba brushes? For most experts, every 6-12 months is good enough. As a result, most people can just replace their brushes and filter at the same time.

You may also like: How to Remove Roller Brush from Shark Vacuum

Cleaning a Roomba Filter

roomba filter cleaning

If you’re balking at the idea of constantly changing Roomba filters in a busy household, I’ve got good news for you. Roomba filter replacement isn’t the end-all when it comes to maintenance.

Instead, Roomba filter cleaning is also an option. Can you wash Roomba filter? Yes, and it is actually encouraged, as it will extend the life of your filters.

You should wash your Roomba filter every month or every six weeks. Once again, this will depend on how dirty your house tends to get, as well as whether you have shedding pets.

So, how does one clean iRobot filter? All you need to do is run it through clean water and let it wash away all that debris and dust. Holding it under running water is a good idea, as this will give it a thorough cleaning.

Then, gently tap it on the edge of your sink or tub to remove the excess dripping water. After that, allow the filter to dry out for a day or two. Under no conditions should you insert a damp filter into your Roomba as this can damage your unit.

Wait for your filter to dry completely before putting it back in, and using it.

At the same time, make sure your Roomba dirt bin isn’t full, because then the dirt won’t have anywhere to go. Here’s how to empty irobot Roomba dirt baskets:

  1. Hold down the bin release button that is found at the back of the Roomba.
  2. Then, open the bin door, which has a button with a bin icon.
  3. Gently pull on the side of the filter to remove the filter from the left side of the bin.
  4. Next, get the bin out, and empty it.
  5. You can rinse the bin with warm water and allow it to dry. Make sure the bin is completely dry before replacing it back in the Roomba.
  6. Put the filter back into the bin.
  7. Set the bin back into the bin slot, and close the bin door.

Got More Questions?

Below you’ll find answers to questions we get asked the most about replacing and cleaning Roomba filters.

01. How Long Does a Roomba Filter Last?

A Roomba filter can last anywhere from 2-12 months before it needs replacing. This will depend on the environment and cleaning frequency.

02. Can I Put My Roomba Filter and Bin in the Dishwasher?

No. Roomba parts like the dust bin and filter are meant to be gently washed by hand. They are not meant to be put in the dishwasher or washing machine.

03. Can I Use Cleaning Products on a Roomba Filter?

You just need to clean your Roomba filter with plain old H20. Dishwashing liquid, washing powder, and other detergents are not needed and may even damage your filter.

04. How Will I Know if My Roomba Bag is Full?

Some Roombas will alert you in some way when the bin or bag is full. This can be an indicator light or even a sign on a display. But some will simply stop working properly, so your Roomba will go over an area without picking up any dirt.

In a Nutshell

Contrary to popular belief, Roombas do need a little maintenance and upkeep. Knowing how often to change Roomba filter will mean the difference between a useless device and one that leaves your house perfectly clean. 

If your Roomba has been acting a little under the weather, maybe it’s time to give its filter a makeover. Then your Roomba will be as good as new!

Related Posts:

Leave a Comment